Welcome to Tile & Grout Pro!

Anti-slip treatment is ideal for polished surfaces in entrance ways or areas where moisture is often present e.g. around swimming pools and bathrooms. This treatment will make dangerous slippery surfaces safer in your home and workplace.How it WorksThe treatment creates a slight etching on the surface of the tile, this etching process is then neutralised with a further treatment. The etched imprint on the surface of the tile will create more of a matte aesthetic to high shine polished surfaces, although the process will not remove all shine completely. The products used conform to National Standards of an R10 when the surface is dry and an R11 when the surface is wet.InstructionsWe require that all areas of treatment are cleared for our arrival and that you have moved away as much of the furniture as possible.Important Information- Treated surfaces usually need a minimum of 4 hours to be touch dry before being walked on.- Treated surfaces should not get wet until the sealer has fully cured, this can take up to 24 hours after treatment.PhotosPhotos help us provide you with more accurate pricing and allow our technicians to be prepared for the work requested.Quotes provided without photos & accurate descriptions are only rough estimates based on the information available at the time of inquiry. Actual costs may vary depending on the specifics of the job. 

PhotosPhotos help us provide you with more accurate pricing and allow our technicians to be prepared for the work requested.Quotes provided without photos & accurate descriptions are only rough estimates based on the information available at the time of inquiry. Actual costs may vary depending on the specifics of the job. 

Tile & Stone Cleaning and Sealing ServiceOur professional cleaning and sealing service is designed to restore the appearance of tiled and stone surfaces while providing long-term protection against staining, moisture, and everyday wear.Cleaning ProcessWe begin with a thorough inspection of the surface to identify the type of tile or stone, level of soiling, and any existing issues such as staining, mould, or grout deterioration. Using specialised commercial-grade equipment and stone-safe cleaning solutions, we deep clean the surface to remove built-up dirt, grime, grease, mould, and contaminants from both the tile/stone and grout lines. This process significantly improves appearance and hygiene without damaging the surface.Sealing ProcessOnce the surface is fully cleaned and dried, we apply a high-quality penetrating or surface sealer appropriate for the material. The sealer absorbs into the tile, stone, and grout, creating a protective barrier that helps resist stains, moisture penetration, and mould growth. Sealing also makes ongoing maintenance easier and prolongs the life of the surface.Benefits of Cleaning & SealingRestores the natural look and colour of tiles and stoneProtects against staining and moisture damageReduces mould and grime build-upImproves ease of ongoing cleaning and maintenanceExtends the lifespan of the surfaceSuitable ForPorous Ceramic, Porous Porcelain, and natural stone tilesTravertine, limestone, marble, slate, and sandstoneIndoor and outdoor areas including bathrooms, kitchens, living areas, balconies, patios, and commercial spaces Regular professional cleaning and sealing is recommended to maintain both the appearance and durability of tiled and stone surfaces, particularly in high-traffic or moisture-prone areas.

Concrete burnishing is a process of polishing concrete surfaces to achieve a smooth and shiny finish. This is done by using specialized equipment that applies friction to the concrete surface to create a high gloss and hard-wearing finish. Burnishing can be done on both new and old concrete surfaces and is a popular choice for both commercial and residential applications. It's a great way to add a sleek and modern look to your concrete floors, countertops, and other surfaces. Contact a professional concrete contractor for more information on concrete burnishing services.Photos Photos help us provide you with more accurate pricing and allow our technicians to be prepared for the work requested.Quotes provided without photos & accurate descriptions are only rough estimates based on the information available at the time of inquiry. Actual costs may vary depending on the specifics of the job. 

Transform your concrete floors with a sleek, durable, and polished finish that enhances both the aesthetics and functionality of your space.Concrete Polishing is a multi-step, mechanical process designed to grind, refine, and polish concrete surfaces, resulting in a smooth, glossy, and highly reflective finish. Using industrial-grade, diamond-impregnated equipment, we progressively work through different levels of grit to achieve the desired level of sheen, whether you're seeking a matte, satin, or high-gloss finish.Our Concrete Polishing process offers numerous benefits:Durability: Polished concrete is highly resistant to wear, abrasion, and impact, making it an excellent choice for both commercial and residential spaces that endure heavy foot traffic.Low Maintenance: Once polished, concrete requires minimal upkeep, reducing the need for waxing or frequent sealing. Routine cleaning is often enough to maintain its glossy look.Aesthetic Appeal: The polished surface can be customized to expose natural aggregates, creating a decorative, high-end look. This is perfect for retail environments, showrooms, galleries, offices, and even residential spaces.Eco-Friendly: By polishing the existing concrete, there’s no need for additional flooring materials, making it a sustainable option. It also improves the floor’s ability to reflect light, reducing energy consumption for lighting.Cost-Effective: Concrete polishing extends the lifespan of your concrete floor, saving you money on repairs, replacement, and additional finishes.Our Concrete Polishing Service includes:Initial Assessment: We inspect your concrete floor to determine its condition, age, and surface imperfections, and provide a tailored plan based on your needs.Grinding & Surface Preparation: Using heavy-duty grinders, we remove surface blemishes, existing coatings, or unevenness to create a smooth base.Polishing Process: We use progressively finer diamond abrasives to polish the concrete to the desired finish level. This can range from a matte finish for a softer look, to a high-gloss, mirror-like finish for a striking appearance.Hardening & Sealing: To enhance durability, we apply a densifier to the concrete, which strengthens the surface and prevents dusting. Depending on your preference, we may also apply a protective sealant to further guard against stains and spills.Final Buffing: The last step involves buffing the floor to bring out the shine and give your polished concrete a beautiful, reflective finish.Common Applications:Commercial buildings (offices, warehouses, retail stores, showrooms)Residential homes (living rooms, garages, basements)Public spaces (museums, galleries, schools, airports)Customizable Finishes:Matte Finish: For a softer, more subdued look, ideal for casual environments or residential spaces.Satin Finish: Perfect for areas requiring a balance between gloss and minimal maintenance.High-Gloss Finish: A mirror-like shine, ideal for spaces requiring a premium look, such as showrooms or retail outlets.Why Choose Us? With years of experience in concrete polishing, our team ensures a professional finish that not only looks stunning but is built to last. We use the latest techniques and equipment to deliver superior results, ensuring your polished concrete is as functional as it is visually appealing.Service Duration: Project time varies depending on the condition of the existing concrete and the size of the space. We will provide an estimated completion time during the assessment phase.Photos Photos help us provide you with more accurate pricing and allow our technicians to be prepared for the work requested.Quotes provided without photos & accurate descriptions are only rough estimates based on the information available at the time of inquiry. Actual costs may vary depending on the specifics of the job. Important Notice – Surrounding SurfacesWhilst the utmost care is taken during the concrete polishing process, this is a mechanical procedure involving heavy-duty grinding equipment. As such, there is a possibility of minor marking, scuffing, or damage to adjacent surfaces, including but not limited to painted walls, skirtings, trims, door frames, or fixtures. By proceeding, clients acknowledge this risk as part of the process, and touch-ups to surrounding finishes are not included unless otherwise agreed in writing.

Our grout installation service is usually for newly laid tile areas, which have had not previously been grouted. We offer this service also if the area has already been sufficiently de-grouted already.How it Works Our technicians are able to create a new grout mix to whatever colour choice you select prior to the commencement of any works. Extra ChargesSealing your grout lines is an additional $26 per square metre. (min service $550)Instructions - Moisture underneath your tiles can also cause damp and mould issues in the future.Important Information- Please allow a minimum of 24 hours for fresh grout to dry properly, grout colour can also alter slightly during this drying period.- Sealed grout should not get wet until the sealer has fully cured, this can take up to 24 hours after sealing.-If there is existing grout in the area, we charge extra to degrout the area in preperation.PhotosPhotos help us provide you with more accurate pricing and allow our technicians to be prepared for the work requested.Quotes provided without photos & accurate descriptions are only rough estimates based on the information available at the time of inquiry. Actual costs may vary depending on the specifics of the job.